REFERENCES
- [1] Landberg, L. 2001. The evaluation of early excavators. Construction Equipment, 104: 99.
- [2] Chang, P. H., and Lee, S.-J. 2002. A straight-line motion tracking control of hydraulic excavator system. Mechatronics, 12: 119-138.
- [3] Seward, D., Pace, C., Morrey, R., and Sommerville, I. 2000. Safety analysis of autonomous excavator functionality, Reliability Engineering & System Safety, 70: 29-39.
- [4] Zimmerman, C. L., Cook, T. M., and Rosecrance, J. C. 1997. Work-related musculoskeletal symptoms and injuries among operating engineers: a review and guidelines for improvement, Applied Occupational and Environmental Hygiene, 12: 480-484.
- [5] Hughes, K., and Jiang, X. 2010. Using discrete event simulation to model excavator operator performance, Human Factors and ergonomics in Manufacturing & Service Industries, 20: 408-423.
- [6] Zhao, J. and Tang, L. 1994. An evaluation of comfort of a bus seat, Applied Ergonomics, 25: 386-392.
- [7] Lusted, M., Healey, S., and Mandryk, J. A. 1994. Evaluation of the seating of quanta’s flight deck crew, Applied Ergonomics, 25: 275-282.
- [8] Kuijt-Evers, L. F. M., Krause, F., and Vink, P. 2003. Aspects to improve cabin comfort of wheel loaders and excavators according to operators. Applied Ergonomics, 34: 265-271.
- [9] Alphin, m. S., Sankaranarayanasamy, K., and Sivapirakasam, S. P. 2010. Experimental evaluation of a whole body vibration exposure from tracked excavator with hydraulic breaker attachment in rock breaking operators. Low Frequency Noise, Vibration and Active Control, 29:101-110.
- [10] Björkstén, M. G., Boqusit, B., Talbäck, M., and Edling, C. 1999. The validity of reported muscloskeletal problems: A study of questionnaire answers in relation to diagnosed disorders and perception of pain. Applied Ergonomics, 30: 325-330.
- [11] Helander, M. G. and Mukund, S. 1991. The use of scaling techniques for subjective evaluations. In: Kumashiro, M. and Megaw, E. D., (Eds.), Towards Human Work: Solution to Problems in Occupational Health and Safety. Taylor & Francis, Landon, 193-200.
- [12] Winkel, J. 1986. Evaluation of foot swelling and lower-limb temperatures in relation to leg activity during long-term seated office work, Ergonomics, 29: 313-328.
- [13] P. A., Putnam, C., and Walker, J. M. 2000. In-chair movement: validity, reliability and implications for measuring sitting discomfort, Applied Ergonomics, 31: 383-393.
- [14] Zhang, L., Helander, M., and Drury, C. G. 1996. Identifying factors of comfort and discomfort in seating, Human Factors, 38: 377-389.
- [15] Mehta, C. R., and Tewari, V. K. 2000. Seating discomfort for tractor operators- a critical review, International Journal of Industrial Ergonomics, 25: 661-674.
- [16] Hänel, S. E., Dartman, T., and Shishoo, R. 1997. Measuring methods for comfort rating for seats and beds”, International Journal of Industrial Ergonomics, 20: 163-172.
- [17] Helander, M. G., and Zhang, L. 1997. Field studies of comfort and discomfort in sitting, Ergonomics, 40: 895-915.
- [18] Shackel, B., Chidsey, K. D., and Shipley, P. 1969. The assessment of chair comfort, Ergonomics, 12: 269-306.
- [19] Corlett, E. N., and Bishop, R. P. 1976. A technique for assessing postural discomfort. Ergonomics, 19: 175-182.
- [20] Ng, D., Cassar, T., and Gross, C. M. 1995. Evaluation of an intelligent seat system, Applied Ergonomics, 26: 109-116.
- [21] Park, S.-J., Lee, Y.-S., Nahm, Y. E., Lee, J.-W., and Kim, J.-S. 1998. Seating physical characteristics and subjective comfort: design considerations. SAE Special Publications Human Factors in Driving, Vehicle Seating, and rear Vision proceeding of the 1998 SAE International Congress & Exposition, 1358: 23-26.
- [22] Ebe, K., and Griffin, M. J. 2000. Subjective models of seat discomfort including static and dynamic factors, Ergonomics, 43: 771-790.
- [23] Ebe, K., and Griffin, M. J. 2000. Quantitative prediction of overall seat discomfort, Ergonomics, 43: 791-806.
- [24] Kolich, M. 2003. Automobile seat comfort: occupant preference vs. anthropometric accommodation, Appl. Ergon. 34: 177-184.
- [25] Corlett, E. N., Wilson, J., and Manenica, I. 1986. (Eds.), The ergonomics of working postures. Section 5: Seats and Sitting, Taylor and Francis, London.
- [26] be, K., and Griffin, M. J., 2001. Factors affecting static seat cushion comfort. Ergonomics, 44: 901-921.
- [27] Fernández, J. E., and Poonawala, M. F. 1998. How long should it take to evaluate seats subjectively?” International Journal of Industrial Ergonomics, 22: 483-487.
- [28] Andreoni, G., Santambrogio, G. C., Rabuffetti, M., and Pedotti, A. 2002.
- [29] Method for the analysis of posture and interface pressure of car drivers. Applied Ergonomics, 33: 511-522.
- [30] Udo, H., Tajima, T., Uda, S., Yoshinaga, F., Ishihara, E., Yamamoto, Y., Hiura, N., Kataoka, A., nakai, K., and Umino, H. 1997. Low back load in two car driver seats, Int. International Journal of Industrial Ergonomics, 20: 215-222.
- [31] Bovenzi, M., and Betta, A. 1994. Low-back disorders in agricultural tractor drivers exposed to whole-body vibration and postural stress. Applied Ergonomics, 25: 231-241.
- [32] Fairley, T. E. 1995. Predicting the discomfort caused by tractor vibration, Ergonomics, 38: 2091-2106.