Yeng-Fong Shih 1, Jia-Yi Xu 1, Chun-Wei Chang 1*

1 Department of Applied Chemistry, Chaoyang University of Technology Taichung, 413310, Taiwan


 

Download Citation: |
Download PDF


ABSTRACT


Thermosetting polymers are characterized by high mechanical performance, thermal resistance, chemical resistance, and good dimensional stability during processing. However, their inability to be repaired and recycled creates an environmental burden. Vitrimers are an important technique to overcome this issue. In this study, a vitrimer derived from biological resources was developed and can be a candidate to replace thermosetting polymers. First, a trifunctional aldehyde was synthesized by nucleophilic substitution of vanillin derived from lignin with 1,3,5-tris(bromomethyl)benzene. Subsequently, it was reacted with commercially available amines to prepare a series of polyimine vitrimers. Dynamic mechanical analysis showed that when the aldehyde and amine were reacted at the stoichiometric ratio, the obtained vitrimer had the largest storage modulus (8.80 GPa) and crosslinking density (1.18 mol/L). Self-healing test showed that the tensile strength of the vitrimer can remain as high as 70.16 MPa after two repair cycles. These characteristics exhibit superior performance in comparison with prior studies. This study successfully developed the vitrimers derived from biological resources with excellent mechanical property and self-healing effect, which is renewable and has a strong potential to replace thermosetting polymers in the future.


Keywords: Biological resources, Vanillin, lignin, Self-healing.


Share this article with your colleagues

 


REFERENCES


  1. Alabiso, W., Schlögl, S. 2020. The impact of vitrimers on the industry of the future: Chemistry, properties and sustainable forward-looking applications. Polymers (Basel), 12, 1–20.

  2. Altuna, F.I., Hoppe, C.E., Williams, R.J.J. 2018. Epoxy vitrimers: the effect of transesterification reactions on the network structure. Polymers, 10, 43.

  3. Burattini, S., Colquhoun, H.M., Fox, J.D., Friedmann, D., Greenland, B.W., Harris, P.J.F., Hayes, W., Mackay, M.E., Rowan, S.J. 2009. A self-repairing, supramolecular polymer system: Healability as a consequence of donor–acceptor π–π stacking interactions. Chemical Communications, 2009, 6717–6719.

  4. Choudhury, L.H., Parvin, T. 2011. Recent advances in the chemistry of imine-based multicomponent reactions (MCRs). Tetrahedron, 67, 8213–8228.

  5. Denissen, W., Winne, J.M., Du Prez, F.E. 2016. Vitrimers: Permanent organic networks with glass-like fluidity. Chemical Science, 7, 30–38.

  6. Elling, B.R., Dichtel, W.R. 2020. Reprocessable cross-linked polymer networks: Are associative exchange mechanisms desirable? ACS Central Science, 6(9), 1488–1496.

  7. Fiore, G.L., Rowan, S.J., Weder, C. 2011. Light-activated healing of metallosupramolecular polymers. Chimia (Aarau), 65, 745.

  8. Garcia, S.J. 2014. Effect of polymer architecture on the intrinsic self-healing character of polymers. European Polymer Journal, 53, 118–125.

  9. Geng, H., Wang, Y., Yu, Q., Gu, S., Zhou, Y., Xu, W., Zhang, X.,Ye, D. 2018. Vanillin-based polyschiff vitrimers: Reprocessability and chemical recyclability. ACS Sustainable Chemistry & Engineering, 6, 15463–15470.

  10. Gu, R., Flidrova, K., Lehn, J.M. 2018. Dynamic covalent metathesis in the C–C/C–N exchange between Knoevenagel compounds and imines. Journal of the American Chemical Society, 140, 5560–5568.

  11. Guerre, M., Taplan, C., Winne, J.M., Du Prez, F.E. 2020. Vitrimers: directing chemical reactivity to control material properties. Chemical Science, 11, 4855-4870.

  12. Hajj, R., Duval, A., Dhers, S., Averous, L. 2020. Network design to control polyimine vitrimers properties: Physical versus chemical approach. Macromolecules, 53, 3796–3805.

  13. Hayashi, M. 2020. Implantation of recyclability and healability into cross-linked commercial polymers by applying the vitrimers concept. Polymers (Basel), 12, 1–15.

  14. Hia, I.L., Vahedi, V., Pasbakhsh, P. 2016. Self-healing polymer composites: Prospects, challenges, and applications. Polymer Reviews, 56, 225–261.

  15. Huang, S., Kong, X., Xiong, Y., Zhang, X., Chen, H., Jiang, W., Niu, Y., Xu, W., Ren, C. 2020. An overview of dynamic covalent bonds in polymer material and their applications. European Polymer Journal, 141, 1–10.

  16. Kuang, X., Liu, G., Dong, X., Wang, D. 2017. Correlation between stress relaxation dynamics and thermochemistry for covalent adaptive networks polymers. Materials Chemistry Frontiers, 1, 111–118.

  17. Latorre, D.C., Lick, I.D., Merlo, A.B., Ballesteros-Plata, D., Rodríguez-Castellón, E., Casella, M.L., Faroppa, M.L., Musci, J.J. 2025. Sustainable Production of Vanillin from Vanillyl Alcohol, a Model Compound of Lignocellulosic Biomass Conversion, via Selective Heterogeneous Catalysis. Applied Science and Engineering Progress, 18(4), 7769.

  18. Lei, Y., Zhang, A., Lin, Y. 2020. Reprocessability of dynamic polydioxaborolane networks activated by heat, moisture and mechanical force. Polymer, 209, 1–15.

  19. Ma, S., Li, T., Liu, X., Zhu, J. 2016. Research progress on bio-based thermosetting resins. Polymer International, 65, 164–173.

  20. Montarnal, D., Capelot, M., Tournilhac, F., Leibler, L. 2011. Silica-Like Malleable Materials from Permanent Organic Networks. Science, 334, 965-968.

  21. Panakkal, E.J., Cheng, Y.S., Khoo, K.S., Show, P.L., Tantayotai, P., Sriariyanun, M. 2024. Bioconversion of Napier grass to 2-phenylethanol: unveiling the synergy of pretreatment with deep eutectic solvents and yeasts. International Journal of Applied Science and Engineering, 21, 2024316.

  22. Rai, A., Pandey, M., Tripathi, S., Parmar, A. S., Ranganath, K.V.S. 2025. Biobased polyimine vitrimers: promising materials for fluorescence quenching, anticounterfeiting, and plastic degradation. ACS Omega, 10, 24756–24767.

  23. Samanta, S., Kim, S., Saito, T., Sokolov, A.P. 2021. Polymers with dynamic bonds: Adaptive functional materials for a sustainable future. Journal of Physical Chemistry B, 125, 9389–9401.

  24. Schoustra, S.K., Asadi, V., Smulders, M.M.J. 2024. Probing the solubility of imine-based covalent adaptable networks. ACS Applied Polymer Materials, 6, 79–89.

  25. Shah, S.R., Thakore, R.R., Vyas, T.A., Sridhar, B. 2016. Conformationally flexible C3-symmetric 1,3-oxazoles as molecular scaffolds. Synlett, 27, 294–300.

  26. Shih, Y.F., Xu, J.Y., Chen, Y.H. 2022. Vanillin-based polyimine vitrimer: Self-healing and physical properties. Materials Science Forum, 1060, 69–74.

  27. Su, Z., Cui, L., Zhang, H., Xiao, L., Chi, B., Xu, H., Ning, L., Jia, S., Wang, X. 2023. Robust, waterproof, and degradable cellulose-based polyimine vitrimer for plastic replacement. Chemical Engineering Journal, 471, 144501.

  28. Sun, Y., Yu, A., Liang, Y., Wang, G., Song, S., Lu, W., He, Z., Meng, S. 2022. Crosslink density and mechanical property evolution during the curing of polyurethane-urea/sodium silicate hybrid composites. High Performance Polymers, 34, 66–76.

  29. Syrett, J.A., Becer, C.R., Haddleton, D.M. 2010. Self-healing and self-mendable polymers. Polymer Chemistry, 1, 978–987.

  30. Tao, Y., Fang, L., Zhou, J., Wang, C., Sun, J., Fang, Q., 2019. Gel-sol transition of vanillin-based polyimine vitrimers: Imparting vitrimers with extra welding and self-healing abilities. ACS Applied Polymer Materials, 2, 295–303.

  31. Taynton, P., Yu, K., Shoemaker, R.K., Jin, Y., Qi, H.J., Zhang, W. 2014. Heat- or water-driven malleability in a highly recyclable covalent network polymer. Advanced Materials, 26, 3938–3942.

  32. Wang, S., Ma, S., Li, Q., Xu, X., Wang, B., Yuan, W., Zhou, S., You, S., Zhu, J. 2019. Facile in situ preparation of high-performance epoxy vitrimer from renewable resources and its application in nondestructive recyclable carbon fiber composite. Green Chemistry, 21, 1484–1497.

  33. Wang, S., Urban, M.W. 2020. Self-healing polymers. Nature Reviews Materials, 5(8), 562–583.

  34. Wu, Z., Chu, C., Jin, Y., Yang, L., Qian, B., Wang, Y., Wang, Y., Wu, J., Jia, Y., Zhang, W., You, Z. 2025. Dynamic cross-linked topological network reconciles the longstanding contradictory properties of polymers. Science Advances, 11, eadt0825.

  35. Yang, Y., Urban, M.W. 2013. Self-healing polymeric materials. Chemical Society Reviews, 42, 7446–7467.

  36. Yu, P., Wang, H., Li, T., Wang, G., Jia, Z., Dong, X., Xu, Y., Ma, Q., Zhang, D., Ding, H., Yu, B. 2023. Mechanically robust, recyclable, and self-healing polyimine networks. Advanced Science, 10, 2300958.

  37. Zhao, B., Liu, T., Fei, M., Hao, C., Bliss, B. J., Cao, Y., Zhang, J. 2024. Biobased vitrimers: a sustainable future. Sustainable Polymer & Energy, 2, 10007.

  38. Zheng, H., Liu, Q., Lei, X., Chen, Y., Zhang, B., Zhang, Q. 2018. A conjugation polyimine vitrimer: fabrication and performance. Journal of Polymer Science, Part A: Polymer Chemistry, 56, 2531–2538.

  39. Zheng, H., Liu, Q., Lei, X., Chen, Y., Zhang, B., Zhang, Q. 2019. Performance-modified polyimine vitrimers: flexibility, thermal stability and easy reprocessing. Journal of Materials Science, 54, 2690–2698.

  40. Zhou, Z., Su, X., Liu, J., Liu, R. 2020. Synthesis of vanillin-based polyimine vitrimers with excellent reprocessability, fast chemical degradability, and adhesion. ACS Applied Polymer Materials, 2, 5716–5725.

  41. Zhu, M., Liu, J., Gan, L., Long, M. 2020. Research progress in bio-based self-healing materials. European Polymer Journal, 129, 1–12.


ARTICLE INFORMATION


Received: 2025-03-03
Revised: 2025-06-25
Accepted: 2025-08-14
Available Online: 2025-09-22


Cite this article:

Shih, Y.F., Xu,J.Y., Chang, C.W. 2025. Sustainable polyimine vitrimers derived from biological resources with high performance and self-healing properties. International Journal of Applied Science and Engineering, 22, 2025078. https://doi.org/10.6703/IJASE.202509_22(3).003

  Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.