Ganjar Pramudi 1*, Nur Ikhsan Ismail 2

1 Manufacturing Engineering Technology, Sebelas Maret University, Surakarta, Indonesia

2 Mechanical Engineering, Sebelas Maret University, Surakarta, Indonesia

 

Download Citation: |
{xpdfattach}


ABSTRACT

This study explored the dynamic properties of composites made from recycled high-density polyethylene (rHDPE) reinforced with bamboo fiber. The stiffness and viscoelastic behavior were analyzed using dynamic mechanical analysis (DMA), focusing on storage modulus (E'), loss modulus (E"), and tan delta (δ). The bamboo fiber, sourced from two-year-old Petung bamboo (Dendrocalamus asper), was treated with a 10% NaOH solution to improve compatibility with rHDPE. Results showed that a 30% bamboo fiber composite stored 122.2% more energy than pure rHDPE and exhibited the smallest decrease in storage modulus (78.5%) with rising temperature, indicating excellent thermal stability. The loss modulus for the 30% composite was 43.5% higher compared to lower fiber contents (10% and 20%), which only increased by 7.6% and 29%, respectively. Additionally, the tan δ value rose by 136.6%, reflecting enhanced energy dissipation. These findings demonstrate that bamboo fiber significantly influences the viscoelastic properties of rHDPE composites. Viscoelasticity is crucial for materials exposed to fluctuating loads and temperatures, making these composites suitable for applications like automotive and construction. By combining renewable bamboo fibers with recycled plastics, this research promotes sustainable material development while achieving superior mechanical performance. This innovation not only reduces environmental impact but also offers cost-effective, high-performance solutions. Future work could explore advanced treatments or hybrid composites to further optimize properties for specialized uses.


Keywords: Bamboo fiber, Composite, Dynamic properties, rHDPE.


Share this article with your colleagues

 


REFERENCES

  1. Abhilash, R., Venkatesh, G., Chauhan, S.S. 2021. Development of bamboo polymer composites with improved impact resistance. Polymers and Polymer Composites, 29, 464–474.

  2. Ami, E., Hanum, L., Dahlan, Z. 2017. Bamboo distribution in Musi Rawas district South Sumatera province. Science and Technology Indonesia, 2, 105–109.

  3. Ashby, M., Shercliff, H., Cebon, D. 2007. Materials engineering science, processing and design. Butterworth-Heinemann.

  4. Baatti, A., Erchiqui, F., Godard, F., Bussières, D., Bébin, P. 2020. DMA analysis, thermal study and morphology of polymethylsilsesquioxane nanoparticles-reinforced HDPE nanocomposite. Journal of Thermal Analysis and Calorimetry, 139, 789–797.

  5. Bashir, M.A. 2021. Use of dynamic mechanical analysis (DMA) for characterizing interfacial interactions in filled polymers. Solids, 2, 108–120.

  6. Chee, S.S., Jawaid, M., Hameed Sultan, M.T. 2017. Thermal Stability and dynamic mechanical properties of Kenaf/bamboo fibre reinforced epoxy composites. BioResources, 12, 7118–7132.

  7. Chen, H., Yu, Y., Zhong, T., Wu, Y., Li, Y., Wu, Z., Fei, B. 2017. Effect of alkali treatment on microstructure and mechanical properties of individual bamboo fibers. Cellulose, 24, 333–347.

  8. El-Wazery, M.S., El-Elamy, M.I., Zoalfakar, S.H. 2017. Mechanical properties of glass fiber reinforced polyester composites. International Journal of Applied Science and Engineering, 14, 121–131.

  9. Gudayu, A.D., Steuernagel, L., Meiners, D., Gideon, R. 2021. Characterization of the dynamic mechanical properties of sisal fiber reinforced PET composites; Effect of fiber loading and fiber surface modification. Polymers and Polymer Composites, 29, 719–728.

  10. Haris, N.I.N., Hassan, M.Z., Ilyas, R.A., Suhot, M.A., Sapuan, S.M., Dolah, R., Mohammad, R., Asyraf, M.R. M. 2022. Dynamic mechanical properties of natural fiber reinforced hybrid polymer composites: a review. Journal of Materials Research and Technology, 19, 167–182.

  11. Jambeck, J.R., Geyer, R., Wilcox, C., Siegler, T.R., Perryman, M., Andrady, A., Narayan, R., Law, K.L. 2015. Plastic waste inputs from land into the ocean. Science 347, 768–771.

  12. Júnior, A., Barreto, A., Rosa, D., Maia, F., Lomonaco, D., Mazzetto, S. 2014. Thermal and mechanical properties of biocomposites based on a cashew nut shell liquid matrix reinforced with bamboo fibers. Journal of Composite Materials, 49(18), 2203–2215.

  13. Karvanis, K., Rusnáková, S., Žaludek, M. Čapka, A. 2018. Preparation and dynamic mechanical analysis of glass or carbon fiber/polymer composites. Journal of Material Science and Engineering, 362, 012005.

  14. Kuciel, S., Mazur, K.E., Robakowska, M., Paukszta, D. 2024. Mechanical, thermal and performance evaluation of hybrid basalt/carbon fibers reinforced bio-based polyethylene terephthalate (BioPet) composites. International Journal of Precision Engineering and Manufacturing-Green Technology, 11, 1557–1573.

  15. Lu, N., Oza, S. 2013. A comparative study of the mechanical properties of hemp fiber with virgin and recycled high density polyethylene matrix. Composites Part B: Engineering, 45, 1651–1656.

  16. Mandal, S., Alam, S. 2012. Dynamic mechanical analysis and morphological studies of glass/bamboo fiber reinforced unsaturated polyester resin-based hybrid composites. Journal of Applied Polymer Science, 125, 382–387.

  17. Menard, K. 2008. Dynamic Mechanical Analysis: A Practical Introduction, CRC press.

  18. Meyers, M.A., Chawla, K.K. 2008. Mechanical behavior of materials. Cambridge University Press.

  19. Miao, W., Chen, H., Pan, Z., Pei, X., Li, L., Li, P., Liu, J., Zhai, J., Pan, H. 2021. Enhancement thermal stability of polyetherimide-based nanocomposites for applications in energy storage. Composites Science and Technology, 201, 108501.

  20. Mohanty, S., Nayak, S.K. 2010. Short bamboo fiber-reinforced hdpe composites: influence of fiber content and modification on strength of the composite. Journal of Reinforced Plastics and Composites, 29, 2199–2210.

  21. Neubauer, M., Pohl, M., Kucher, M., Böhm, R., Höschler, K., Modler, N. 2022. DMA of TPU films and the modelling of their viscoelastic properties for noise reduction in jet engines. Polymers, 14, 5285.

  22. Perkinelmer 2013. Dynamic mechanical analysis (DMA). CRC Press.

  23. Pramudi, G., Raharjo, W.W., Ariawan, D. 2022a. Investigation of flexural strength of sandwich panels recycled carbon fibre/polyester with cotton mesh fabric reinforcement in polyurethane core. Journal of Applied Science and Engineering, 25, 823–831.

  24. Pramudi, G., Raharjo, W.W., Ariawan, D. 2022b. Investigation of the flexural and impact strength of recycled carbon fiber (RCF) polyester composite. AIP Conference Proceedings.

  25. Pramudi, G., Raharjo, W.W., Ariawan, D., Ubaidillah Arifin, Z. 2021. Utilization of bamboo fiber in the development of environmentally friendly composite – a review. IOP Conference Series: Materials Science and Engineering, 1096, 012038.

  26. Pricop, B., Sava, Ș.D., Lohan, N.-M., Bujoreanu, L.-G. 2022. DMA investigation of the factors influencing the glass transition in 3d printed specimens of shape memory recycled PET. Polymers, 14, 2248.

  27. Rajesh, C., Divia, P., Dinooplal, S., Unnikrishnan, G., Purushothaman, E. 2021. Dynamic mechanical analysis of nylon 6 fiber-reinforced acrylonitrile butadiene rubber composites. Polymers and Polymer Composites, 29, 1328–1339.

  28. Richmond, T., Lods, L., Dandurand, J., Dantras, E., Lacabanne, C., Malburet, S., Graillot, A., Durand, J.-M., Sherwood, E., Ponteins, P. 2022. Physical and dynamic mechanical properties of continuous bamboo reinforcement/bio-based epoxy composites. Materials Research Express, 9, 015505.

  29. Shih, Y.-F., Chen, Y.-H., Lai, S.-Y., Chen, Y.-X., Wang, S.-C., Zhang, S.-P. 2021. The effect of thermal, flammability, and mechanical properties of wood plastic composites made from recycled food-packaging LDPE and eco-friendly phytic acid. International Journal of Applied Science and Engineering, 18, 1–8.

  30. Shah, A., Sultan, M., Jawaid, M., Cardona, F., Abu Talib, A.R. 2016. A review on the tensile properties of bamboo fiber reinforced polymer composites. Bioresources, 11, 10654–10676.

  31. Sogancioglu, M., Yel, E., Ahmetli, G. 2017. Pyrolysis of waste high density polyethylene (HDPE) and low density polyethylene (LDPE) plastics and production of epoxy composites with their pyrolysis chars. Journal of Cleaner Production, 165, 369–381.

  32. Surya Nagendra, P., Prasad, V.V.S., Ramji, K. 2017. A study on dynamic mechanical analysis of natural nano banana particle filled polymer matrix composites. Materials Today: Proceedings, 4, 9081–9086.

  33. Tsai, P.-H., Ni, S.-H. 2012. Effects of types of additives on dynamic properties of cement stabilized soils. International Journal of Applied Science and Engineering, 10, 131–144.

  34. Uyor, U.O., Popoola, P.A., Popoola, O.M. 2022. Enhanced mechanical and dynamic mechanical properties of polymer nanocomposites containing carbon nanotubes decorated with barium titanate. Polymers and Polymer Composites, 30, 09673911221100160.

  35. Venkategowda, T., Manjunatha, L.H., Anilkumar, P.R. 2022. Dynamic mechanical behavior of natural fibers reinforced polymer matrix composite: A review. Materials Today: Proceedings, 54, 395–401.

  36. Vijayan, D.S., Sivasuriyan, A., Devarajan, P., Stefańska, A., Wodzyński, Ł., Koda, E. 2023. Carbon fibre-reinforced polymer (CFRP) composites in civil engineering application: A comprehensive review. Buildings, 13, 1509.

  37. Wang, H., Wang, H., Li, W., Ren, D., Yu, Y. 2013. Effects of moisture content on the mechanical properties of moso bamboo at the macroscopic and cellular levels. Bioresources, 8, 4.

  38. Zakaria, A.M., Jamaludin, M.A., Zakaria, M.N., Hassan, R., Bahari, S.A. 2022. High density polyethylene (HDPE) composite mixed with Azadirachta excelsa (Sentang) tree waste flour: Mechanical and physical properties. IOP Conference Series: Earth and Environmental Science, 951, 012045.

  39. Zhang, W., Wang, C., Gu, S., Yu, H., Cheng, H., Wang, G. 2021. Physical-mechanical properties of bamboo fiber composites using filament winding. Polymers, 13, 2913.

  40. Zhao, H., Lin, X., Lu, S., Wu, H., Zhou, X., Huang, L., Li, J., Shi, J., Tong, W., Yuan, H., Chen, L. 2023. Anti-mold, self-cleaning superhydrophobic bamboo fiber/polypropylene composites with mechanical durability. Frontiers in Chemistry, 11, 1150635.


ARTICLE INFORMATION

Received: 2024-11-09
Revised: 2025-04-16
Accepted: 2026-01-12
Available Online: 2026-03-16


Cite this article:

Pramudi, G., Ismail, N.I., 2026. Viscoelastic of recycled high-density polyethylene (rHDPE) reinforcement with bamboo fiber composite. International Journal of Applied Science and Engineering, 23, 2024403. https://doi.org/10.6703/IJASE.202606_23(2).005

  Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.

Other people also read ...