Indonesia already has national wheelchair standards namely Indonesian National Standard (SNI) SNI 09-4663-1998, but the standard already used for 20 years without any renewal. On the other hand, the development of wheelchair technology has a rapid transformation; wheelchair developers begin to apply the technology to their wheelchairs. For the development, relevant stakeholder are needs to identify key parameters for developing wheelchair standards. To develop this standard the Framework for Analysis, Comparison, and Testing of Standards (FACTS) method is used. The FACTS have three stages: analysis, comparison, and testing. The FACTS method is used to identify stakeholder needs. The results of this study is a framework that can be used to develop a wheelchair standard. It is also proposed a structural equation model for measuring implementation standard and we can classify them into three dimensions, i.e. improve quality, stakeholder protection and smothness and efficiency of trade.
Keywords: Standardization; Indonesian National Standard; manual wheelchair; framework for analysis comparison and testing standard; structural equation model.
Share this article with your colleagues
REFERENCES
[1] Kharisma, A.and Indrojarwo, B. T. 2016. Desain kursi roda dengan sistem kemudi tuas sebagai sarana mobilitas bagi anak penderita cerebral palsy usia 6 hingga 10 th. Jurnal Sains & Seni ITS, 5, 2: F-271-275. doi: 10.12962/j23373520.v5i2.21007 [inIndonesian] https://dx.doi.org/10.4102%2Fajod.v6i0.288">4102/ajod.v6i0.288
[2] Mhatre, A., Martin, D., McCambridge, M., Reese, N., Sullivan, M., Schoendorfer, D., Wunderlich, E., Rushman, C., Mahilo, D, and Pearlman, J. 2017. Developing product quality standards for wheelchairs used in less-resourced environments. African Journal of Disability, 6: 288. doi: 10.4102/ajod.v6i0.288
[3] Cooper, R. A. 2006. Wheelchair standards: It's all about quality assurance and evidence-based practice. The Journal of Spinal Cord Medicine, 29, 2: 93-94. doi: 1080/10790268. 2006.11753862
[4] Goher, K. M. 2016. A reconfigurable wheelchair for mobility and rehabilitation: Design and development. Cogent Engineering, 3, 1: 1261502. doi: 10.1080/23311916.2016.1261502
[5] Sutopo, W. and Kadir, E. A. 2017. An Indonesian standard of lithium-ion battery. Telecommunication, Computing, Electronics and Control (TELKOMNIKA), 15, 2: 584-589. doi: 12928/telkomnika.v15i2.6233
[6] Sutopo, W. and Kadir, E. A. 2018. Designing framework for standardization case study: Lithium-ion battery module in electric vehicle application. International Journal of Electrical and Computer Engineering (IJECE), 8, 1: 220-226. doi: 11591/ijece.v8i1. pp220-226
[7] Sutopo, W., Rahmawatie, B., Fahma, F., Nizam, M., Purwanto, A., Louhenapessy, B.B., Kadir, E. A. A technical review of BMS performance standard for electric vehicle applications in Indonesia. Telecommunication, Computing, Electronics and Control (TELKOMNIKA), 16, 2: 544-549. doi: 10.12928/telkomnika.v16i2.7930
[8] Witherell, P., Rachuri, S., Narayanan, A., and Lee, J. H. 2013. “FACTS: A framework for Analysis, Comparison, and Testing of Standards” (NIST Interagency/Internal Report (NISTIR) 7935). National Institute of Standards and Technology, U.S. Department of Commerce. doi: 10.6028/NIST.IR.7935
[9] Santoso, S. 2015. “SPSS20 Pengolahan Data Statistik di Era Informasi”. PT. Alex Media Komputindo. Jakarta, Indonesia. [in Indonesianhttp://dx.doi.org/10.1080/08974438.2013.723997">: 10.1080/08974438.2013.723997
[10] Aziz, Y. A. and Chok, N. V. 2013. The role of halal awareness, Halal certification, and marketing components in determining Halal purchase intention among non-Muslims in Malaysia: A structural equation modeling approach. Journal of International Food & Agribusiness Marketing, 25, 1: 1–23. doi: 10.1080/08974438.2013.723997
[11] Borg, J. and Khasnabis, C. 2008. Guidelines on the provision of manual wheelchairs in less-resourced settings. World Health Organization. Geneva. Retrieve from https://www.who.int/disabilities/publications/technology/English%20Wheelchair%20Guidelines%20(EN%20for%20the%20web).pdf?ua=1
[12] International Organization for Standardization. 2014. ISO 7176-1: 2014 wheelchairs—part 1: Determination of static stability. ISO. Geneva. Switzerland. Retrieve from https://www.iso.org/standard/56817.html
[13] International Organization for Standardization. 2008. ISO 7176-5: 2008 wheelchairs—part 5: Determination of dimensional space, mass and maneuverability. ISO. Geneva. Switzerland. Retrieve from https://www.iso.org/standard/46429.html
[14] International Organization for Standardization. 1998. ISO 7176-7: 1998 wheelchairs—part 7: Measurements of seating and wheel dimensions. ISO. Geneva. Switzerland. Retrieve from https://www.iso.org/obp/ui/#iso:std:iso:7176:-7:ed-1:v1:en
[15] Soewardi, H. 2015. Inovative design of wheelchair by using user-centered design approach. In Proceeding the 8th International Seminar on Industrial Engineering and Management, Malang, Indonesia, March 17-19, 2015.
[16] International Organization for Standardization. 2014. ISO 7176-8: 2014 wheelchairs—part 8: Requirements and test methods for static strength, impact and fatigue. ISO. Geneva. Switzerland. Retrieve from https://www.iso.org/standard/64902.html
[17] International Organization for Standardization. 2012. ISO 7176-16: 2012 wheelchairs—part 16: Resistance to ignition of postural support devices. ISO. Geneva. Switzerland. Retrieve from https://www.iso.org/standard/40992.html
[18] Batan, I. M. L. 2006. Pengembangan Kursi Roda Sebagai Upaya Peningkatan Ruang Gerak Penderita Cacat. Jurnal Teknik Industri, 8, 2: 97-105. doi: 9744/jti.8.2.pp.%2097-105
[19] International Organization for Standardization. 2012. ISO 7176-3: 2012 wheelchairs—part 3: Determining the effectiveness of the brakes. ISO. Geneva. Switzerland. Retrieve from https://www.iso.org/standard/53816.html
ARTICLE INFORMATION
Received: 2018-06-14 Revised: 2018-10-21 Accepted: 2018-10-22 Available Online: 2018-10-22
Cite this article:
Pratiwi, R.A., Fahma, F., Sutopo, W., Pujiyanto, E., Suprapto, Ayundyahrini, M. 2018. Designing parameter for developing standard of manual wheelchair. International Journal of Applied Science and Engineering, 16, 127-134. https://doi.org/10.6703/IJASE.201810_15(2).127