International Journal of Applied Science and Engineering
Published by Chaoyang University of Technology

Kesavamoorthi. R, Mohan Ganesh. G

School of Civil Engineering, Vellore Institute of technology, Vellore, India

Download Citation: |
Download PDF


ABSTRACT

The process of concrete mix design encompasses numerous parameters. Finding the ideal mix design may be quite challenging for self-compacting concrete (SCC). This research aims to identify the best optimum mix proportions for SCC using TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) method. In this methodology, SCC mixtures with an extensive set of experimental data and performance measures are combined into a single value for optimizing. For this the required data sets of twenty-one SCC mixtures were developed utilizing the Nan-Su method with M50 grade of concrete and cast for finding fresh and mechanical properties. The slump flow was measured using EFNARC standards and compressive strength was measured. The input parameters for the TOPSIS method were slump flow, compressive strength, superplasticizer (SP), viscosity modifying agent (VMA), and the W/C ratio which were among the five criteria used to choose as alternatives among the twenty-one different mix proportions. Therefore, the experimental data set of SCC provides the essential data for the decision matrix. TOPSIS is a ranking algorithm for condensing the results of many different criteria into a single value. By evaluating and rating the various mixture proportions, the optimal one was identified which reduces the number of trail mixtures in future, as seen in the details given in this study. Further, the study will evaluate the effect of supplementary cementitious materials (SCMs) on the properties of SCC. The replacement of SCMs improves the fresh and mechanical properties compared to the control mix and SCMs promotes the sustainable and environmentally friendly construction practices.


Keywords: EFNARC, Nan-Su method, Self-compacting concrete, TOPSIS.


Share this article with your colleagues

 


REFERENCES

  1. Abed, M., Fořt, J., Rashid, K. 2022. Multicriterial life cycle assessment of eco-efficient self-compacting concrete modified by waste perlite powder and recycled concrete aggregate. Construction and Building Materials, 348, 128696.

  2. Athiyamaan, V., Mohan Ganesh, G. 2020a. Experimental, statistical and simulation analysis on impact of micro steel fibres in reinforced SCC containing admixtures. Construction and Building Materials, 246.
  3. Athiyaman, V., Mohan Ganesh, G. 2018b. Optimization of SCC mix design using nan-su theory embodying DOE method. The Indian Concrete Journal, 92, 31-41.

  4. Bicer, A. 2018. Effect of fly ash particle size on thermal and mechanical properties of fly ash-cement composites. Thermal Science and Engineering Progress, 8, 78–82.

  5. Chindaprasirt, P., Jaturapitakkul, C., Sinsiri, T. 2005. Effect of fly ash fineness on compressive strength and pore size of blended cement paste. Cement and Concrete Composites, 27, 425–428.

  6. EFNARC, 2005. The European guidelines for self-compacting concrete specification, production and use. The European guidelines for self - compacting concrete, 22, 563.

  7. Kunhanandan, E.K., N.K.R. 2006. Models relating mixture composition to the density and strength of foam concrete using response surface methodology . Cement and Concrete Composites, 28, 752–760.

  8. Murugan, S.B., Ganesh, G.M., Santhi, A.S. 2012. Regression models for prediction of compressive strength of high-volume fly ash (HVFA) concrete. Arabian Journal for Science and Engineering, 39, 1659–1669.

  9. Nili, M., Afroughsabet, V. 2010. Combined effect of silica fume and steel fibers on the impact resistance and mechanical properties of concrete. International Journal of Impact Engineering, 37, 879–886.

  10. Okamura, H., Ouchi, M. 2003. Self-Compacting Concrete. Journal of Advanced Concrete Technology, 1, 5–15.

  11. Praveenkumar, S., Sankarasubramanian, G. 2021. Optimization of mix proportions for high performance concrete using TOPSIS method. Journal of Building Pathology and Rehabilitation, 6, 39.

  12. Praveenkumar, S., Sankarasubramanian, G., Sindhu, S. 2019. Selecting optimized mix proportion of bagasse ash blended high performance concrete using analytical hierarchy process (AHP). Computers and Concrete, 23, 459–470.

  13. Reddy, A.S., Kumar, P.R., Raj, P.A. 2020. Development of sustainable performance index (SPI) for self-compacting concretes. Journal of Building Engineering, 27, 100974.

  14. Regalla, S.S., Senthil Kumar, N. 2024a. Effect of curing regimes on the rheological, mechanical, hydration and microstructure of ultra-high-performance concrete (UHPC) using indigenous resources: progress towards sustainable construction practices. Composite Interfaces, 31, 777–820.

  15. Regalla, S.S., Senthil Kumar, N. 2024b. Investigation of hydration kinetics, microstructure and mechanical properties of multiwalled carbon nano tubes (MWCNT) based future emerging ecological economic ultra high-performance concrete (E3 UHPC). Results in Engineering, 23, 102432.

  16. Regalla, S.S., Senthil Kumar, N. 2024c. Effect of nano SiO2 on rheology, nucleation seeding, hydration mechanism, mechanical properties and microstructure amelioration of ultra-high-performance concrete. Case Studies in Construction Materials, 20, e03147.

  17. Regalla, S., Senthil Kumar, N. 2023d. Influence of grapheneoxide in the hydration mechanism by reinforcing mechanical strength and microstructural characterization of ultra-high-performance concrete (UHPC). Journal of Dispersion Science and Technology, 46, 170–187.

  18. Revilla-Cuesta, V., Skaf, M., Espinosa, A.B., Ortega-López, V. 2021. Multi-criteria feasibility of real use of self-compacting concrete with sustainable aggregate, binder and powder. Journal of Cleaner Production, 325, 129327.

  19. Sharifi, E., Sadjadi, S.J., Aliha, M.R.M., Moniri, A. 2020. Optimization of high-strength self-consolidating concrete mix design using an improved Taguchi optimization method. Construction and Building Materials, 236, 117547.

  20. Şimşek, B., Iç, Y.T., Şimşek, E.H. 2013a. A TOPSIS-based Taguchi optimization to determine optimal mixture proportions of the high strength self-compacting concrete. Chemometrics and Intelligent Laboratory Systems, 125, 18–32.
  21. Şimşek, B., Uygunoǧlu, T. 2016b. Multi-response optimization of polymer blended concrete: A TOPSIS based Taguchi application. Construction and Building Materials, 117, 251–262.

  22. Skarendahl, A., Billberg, Peter. 2006. Casting of self-compacting concrete: Final report of RILEM TC 188-CSC. RILEM Publications.

  23. Sokolović, J., Stanujkić, D., Štirbanović, Z. 2021. Selection of process for aluminium separation from waste cables by TOPSIS and WASPAS methods. Minerals Engineering, 173, 107186.

  24. Su, N., Hsu, K.-C., Chai, H.-W. 2001. A simple mix design method for self-compacting concrete. Cement and Concrete Research, 31, 1799–1807.

  25. Swathi, B., Vidjeapriya, R. 2024. A multi-criterial optimization of low-carbon binders for a sustainable high-strength concrete using TOPSIS. Construction and Building Materials, 425, 135992.

  26. Türkmen, İ., Gül, R., Çelİk, C., Demİrboğa, R. 2003. Determination by the Taguchi method of optimum conditions for mechanical properties of high strength concrete with admixtures of silica fume and blast furnace slag. Civil Engineering and Environmental Systems, 20, 105–118.


ARTICLE INFORMATION

Received: 2024-08-31
Revised: 2025-03-01
Accepted: 2025-03-28
Available Online: 2025-04-25


Cite this article:

Kesavamoorthi. R, Mohan Ganesh. G. 2025. Optimization of mixture proportions for self-compacting concrete using TOPSIS method. International Journal of Applied Science and Engineering, 22, 2024319.https://doi.org/10.6703/IJASE.202503_22(1).004

  Copyright The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are cited.

Other people also read ...

doaj logo

 

2.9
2023CiteScore
 
 
67th percentile
Powered by  Scopus
 
 

SCImago Journal & Country Rank

IJASE - Most Read Articles

IJASE - Most popular articles